Extraction Procedure:

1

After clearing obstruction with Jaws of Life; position of splint in preparation for extraction splinting of limb in position found.

2

If ankle is unstable, SAM SPLINTS can be used to immobilize with figure-of-eight strap.

SAM SPLINTS:

a

(The C-Curve): Curve the SAM Splint length-wise to create a longitudinal bend which gives the splint strength.

b

(The Reverse C-Curve); Curve the outside edges in the opposite direction to make it even stronger.

c

(The T-Curve): Double the SAM Splint or create a T-Bend for extra strength.

Straight Leg Knee Injury:

1

When splinting with Sager Emergency Fracture Response System (SEFRS) create a 6-10 degree valgus and lock into place on the distal half of the Splint.

2

This Tensor Cravat should be added

distal to the head of the Fibula.

Normal 6-degrees valgus of the tibia/fibula at the knee joint.

Bent Knee In jury:

1

Anterior position of Splint for bent knee injuries.

2

Place Tensor Cravats as shown.
Knee immobilized.

A Traction splint is contraindicated in any knee injury. Proper leg splinting: Injuries at the knee should be splinted in position found.Attempt to straighten a bent knee is only indicated if pulses are absent and leg straightening is done without pain or resistance to movement.

Fracture Dislocation of the Knee:

1

Splint position for fracture dislocation knee injury.

2

Place Tensor Cravats as shown. Knee immobilized.

Ankle Injury:

1

Splint position for ankle injury.

2

Place Tensor Cravats as shown.
Knee immobilized.

Dislocated Shoulder:

1

Dislocation of shoulder splinted in position found.

2

Arm is immobilized.

Forearm Injury:

1

Anterior view forearm injury.

2

Splinted forearm.

Fractured Elbow:

Distal pad can be rotated to fit in palm of the hand.

1

Splint position for fractured elbow.

2

Immobilized fractured elbow.

Elbow Injury:

1

Elbow injury in position found and splinted.

Fractured Wrist, Forearm
or Elbow:

2

Immobilized wrist, forearm or elbow.


<back to top>

SEFRS unique design ensures virtually pain-free application. The SEFRS Adaptor™ is lightly placed and centered over the fracture site and the arms aligned with each side of the fracture. The Adaptor™ is locked to retain the fracture configuration, then removed and attached to the padded splint arms. SEFRS is an excellent device for extrication. When the splint is in place it remains within the silhouette of the injured limb; no extraneous parts to hang-up or impede when extricating patient.

For fractured femurs follow the SX405 application procedure of Position, Set, Secure. Click here.

Accident Extrication Procedures

SAM Splints

Straight Leg Knee Injury

Bent Knee Injury

Fracture Dislocation of the Knee

Ankle Injury

Dislocated Shoulder

Forearm Injury

Fractured Elbow

Elbow Injury

Fractured Wrist, Forearm or Elbow

< NEXT >